F:GRAN
The efficiency star for pre-shredded material
Thanks to a wide range of various system sizes, F:GRAN can be implemented as a precise fit. Together with its significantly increased energy efficiency, this recycling technology is doubly cost-effective.
Description
In recycling of ground up plastics, predominantly from plastic washing sys- tems, there is no better choice than the F:GRAN. Flakes, even of varying size, are processed at a consistently high throughput rate.
F:GRAN is distinguished by its efficient material handling. The flakes to be processed are continuously circulated by rotors in a storage silo measuring up to 30 m3. This prevents problems caused by bridging from the beginning.
At a glance
- Processing regrind and film flakes
- Output rate up to 2.500 kg/h (5,500 lbs/h) depending on type
- Switching on and off by a single push button
- Simple, stable process
- Storage silo up to 30 m3 for material buffer
* Output values for LDPE according to NGR company standard, depending on material and quality. Depending on the application, we naturally can also integrate common piston screen changers.
Technology
The operating principle of F:GRAN
In the anti-bridging silo, rotors keep the plastic flakes in motion. This prevents the flakes from bridging and ensures flowability.
In the transition area between the flake conveyor and the extruder input, the feeding screw acts like a feeder. The flakes are gently transported continuously from the large-dimensioned feeder screw into the extruder. This arrangement facilitates the processing of flakes of different sizes (the flake size is of minor importance). The pressure on the plastic flakes increases steadily as they enter the extruder intake, in order to achieve high throughput rates.
All the components are positioned in close proximity to prevent oxidation of the material and to make optimal use of heat from the shredding process.
Automatic feeder screw control
The feeder screw is automatically activated depending on the utilization of the extruder capacity. This ensures an optimized throughput without operator interference saving on labour costs.
Anti-bridging silo
The anti-bridging silo is used to store the plastic flakes and is equipped with rotors to prevent the flakes from bridging. Located directly over the feeder screw, the anti-bridging silo ensures a continuous supply of flakes.
One-button automatic ON/OFF control
The control system provides for smooth start-up of equipment components. Restart after unplanned shutdown in less than two minutes with full hopper and full extruder.
Dump and run operation
The material level in the anti-bridging silo is constantly measured and the feed is regulated accordingly. Discontinuous filling of the anti-bridging silo is possible – the NGR control unit does the rest .
Extruder screw
Extruder screw
Specially developed for the challenges of recycling, the universal extruder screws provide optimum melt homogeneity and process material efficiently with minimal loss of physical properties. For special requirements, our expert NGR engineers develop custom-tailored screw geometries.
Control unit
Control unit
All equipment functions from feeding to pelletizing are controlled automatically from the easy-to-read NGR touchscreen. Recipes are managed in the operator control unit, which increases traceability, provides ease of use, and ensures equipment parameters are set properly.
High-quality pellets
Pellet size
In addition to high quality, the uniform pellet size also provides for homogeneous mixture in new material. NGR thus plays an indirect role in ensuring consistent quality in the final product.
Add-Ons
Feed-in
Degassing
Pelletization
Filter
Test equipment
Feed-in
Conveyor belt
Conveyor belt
The conveyor belt transports the feed material through a metal detector into the feed hopper. The belt is stopped automatically, if metallic matter is detected in order to remove it.
Dosing unit
Dosing unit
Additives such as color pigments, CaCo3, compatibilizers can be added to the material flow in a process-controlled manner. Dosing systems for pellet and/or powdered additives are available.
Degassing
Pelletization
Filter
Test equipment
Material samples
Gallery
Images
The solidly designed feeder screw transports the plastic flakes to the extruder. Before the extruder intake, pressure is continuously built up on the flakes.
In this section, the feeder screw acts like a feeder, which supports the feeding into the extruder intake and thus ensures high throughput rates.
Testimonials
NGR’s response time and service driven partnership sets a standard unmatched in the industry.
Phillip Goldberg, President
Columbia Recycling, USA
Support
Our all-round service – satisfaction included
Excellent technology calls for excellent service. Our 100% commitment to flawless service ensures maximal cost efficiency and minimal downtime.
Our services
- Service hubs for the fastest possible processing of all maintenance and repair work
- Spare parts centers for flexible responses to strong markets
- High spare parts availability thanks to particularly high stock levels in Europe and North America
- Worldwide extruder screw production for short-term production or repairs
- Starter and spare parts packages for every new machine
NGR Applications & Solutions
[5 MB]
